Modified RC Losi Center Diff Mount Set

This center diff mount set from Modified RC features extra wide feet on the top and bottom of the uprights, this prevents rocking when the diff mount contacts the clutch housing during extreme chassis flex. Bearing removal is made easy with the use of O-rings in the bearing bores, they allow a nice snug fit without using a press fit on the aluminum bearing bores.

 


Also includes:
1- Two huge 15x28x7 diff bearings, the rear bearing has a custom inner race modified for this application.
2- Four brake actuator bearings(top and bottom, front and rear).
3- Four different sets of brake screws so you can run single or dual brakes on the front or rear, in any combination you choose.
4- Two nylock nuts(for front) and two thin nuts(for rear) for locking the brake adjustment screws in position.
5- Two aluminum lower brake disc guides to keep the discs in line, they work with single and dual brakes(front and rear) and are easy to remove and attach.
6- Four extra long mounting screws to mount the uprights to the chassis.
7- Four extra long mounting screws to mount the uprights to the top plate.
8- Two small O-rings that slide over the brake actuators and against the top plate, so the upper brake bearings in the top plate stay clean.

The center diff mount sets and spare diff bearing sets and spare lower brake disc guides are now available on my site Center diff mount set
I’ll get more spares and center diff kits complete and sent to DDM, LargeScaleRC, and TGN within a few weeks.
Replacement brake actuator bearings can be purchased from Team Fast Eddy.

Below is a stock diff bearing compared to the larger 15x28x7 bearing that is used in my kit.

 

Here is a pic with the diff installed and the use of dual disc brakes in the front and a single disc brake in the rear. The kit comes with 4 different length brake screws, so you can run any combination of single or dual brakes in the front and/or rear.
For extra pads and discs to run dual brakes use LOSI part #LOSB3231

 

 

Another pic showing the extra wide feet on the top and bottom of the uprights, and the two included small O-rings that slide over the brake actuators and down to the top plate to keep the upper brake bearings clean.

 

 


This pic shows one of the lower brake disc guides, they can be used with single or dual brakes. Two are included in the kit(one front and one rear).

 

Thanks for looking and let me know if you have any questions, testing and prototyping these parts started before the 2012 Power Jam, so it sure is nice to finally be able to get them out to you guys!

For more information of questions about this product please click HERE

One Response to Modified RC Losi Center Diff Mount Set

  • shayne ancheta says:

    I was wondering where I could buy one of the center diff mounts? And is this for the losi dbxl also?

Leave a Reply

Your email address will not be published. Required fields are marked *

*

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

Tag Cloud
Archives