Tonys Screw kit and Plano organizer

[RDucky47]

I got the Tonys screw kit for the 5ive and wow, he really out did himself. The screws are sorted into individually marked zip lock baggies by head type, size, and length. The kit includes all of the cap, flat, and button heads along with washers, SS washers, a lock washer, lock nuts and set screws. Its a great kit and far exceeds the losi emergency hardware kit I had, except for the left hand thread shock mount screws, which isnt a big deal. Im very happy with it.

I've been looking for a plano organizer that holds all of my hardware for some time. I have a bigger plano box that ive been using for some time and it has three drawers of organizers and cant accomodate all the screws into individual bins so I lump screws by size and head type and then have to hunt down the right length in the bin. Not a huge hassle but I was looking for something better. I was at Menards yesterday and I finally found a organizer that does this, and its only $10. Its a Plano double cover jock jaw organizer. It has more than enough bins to organize the screws into their own bins how they came from Tonys scrwes (individual bins by head type, size, and length). Its got a good amount of extra bins left over still as well. Very happy I came across this yesterday.

Double Cover Lock Jaw Organizer at Menards

[PegLeg]

Thanks, Dave. I've been looking for something like this for a long time. I'll be picking one up today.

[BASHINBEAST]

Who's selling the kit?

[Hectima007]

It's a Tony Screw Kit for the Losi 5

[BASHINBEAST]

Originally Posted by Hectima007

It's a Tony Screw Kit for the Losi 5

Which vendor is carrying Tony Screw kit for the losi?

[Hectima007]

Got to go through his site for the 5ives kit

[BASHINBEAST]

Thanks Hectima007...just ordered a set for my buggy build!

[insanity]

I took a plano like organizer that had the little removable dividers to put my tonys screw kits in for my ofna hyper 9e and savage ss/super 5sc. I took all the screws out of their bags then put the labels on the lid so when it is open all I have to do is look for what I want and grab the screw.

[SwampKing]

If u go to lowes, they have these double drawer flip open boxes and organizers in them. Almost like a plumbers toolbox. And the drawers are separated. That's what I use. I also purchased a huge 79quart wheel able box that I can throw everything in except the truck to bring with me as well. Works great for my small scales too. I can put two 1:10 trucks in and 2-3 toolboxes mentioned with my charger no probs.


Tekno SCT410 "Lite" RX8/Pro4
Tekno SCT410 "Hefty" RX8/Pro4
Tekno V4 SC8.2e
Losi 5ive-T Trevor Simpson reed built 2-speed
MUGEN MBX7 nitro
--If ya can't Tekno, Then you can't Dance on the stand!--
Team SR

[RDucky47]

I use another plano organizer that has a flip open top and then the bottom has three organizers. But I wanted a seperate organizer that could hold all of my hardware

[Jones Auto]

Heres another nice carrier I got from Snap On. It holds my 1 gallon fueler and spare tires. Also has some side pockets. I purchased it from Amazon.[IMG][/IMG]

[PegLeg]

Originally Posted by Jones Auto

Heres another nice carrier I got from Snap On. It holds my 1 gallon fueler and spare tires. Also has some side pockets. I purchased it from Amazon.[IMG][/IMG]

I bought the same one! LOL!

[SwampKing]

Here a couple of mine.

[Jones Auto]

I since shitcanned the Spektrum radio for Futaba 4pKS-R.

[Jones Auto]

Heres all the sizes youll need. I compiled a list last year on another forum. Got them from Bolt Depot.com. Ordered a 100 of each size. The cost was $90.00 This is one of 3 boxes I have..

[Jones Auto]

3x12 flat 3x12 cap 4x12 flat 4x16 flat 4x14 cap 4x16 cap 5x16,20,25,35 flat 6x20 flat 6x20 button m3,4,5 locknut m5 hex nut m4,5,6 washer m5 lockwasher.Bottom socket cap bolts on the case halfs are 5x20. This is the stock length, and theres no room for a longer one. Uppers can use 5X35mm

[SwampKing]

FUTABA for the win! You going to drive faster immediately too!!!! Haha
Thanks for listing as I'm equipping myself thru the up coming months for sure. I'm fairly new to the 5ives and been dealing with small scale racing lately.

[Jones Auto]

Tony makes a great kit. Ive bought them in the past for my other RCS. Your just gonna pay more for the service of having it all done for you.

[insanity]

Thanks JA I think you made it a easier choice for me to build a screw kit over buying a large one.

[SwampKing]

I been wanting this screw kit but they're always out of stock when I try for purchasing.