Team FastEddy Products Technical Support Thread

[FastEddy]

If you have technical support issues with any TFE Part or product, please post it here.
Many of the users here should be able to answer your question and if not, I will be sure to chime in.

[LowFlier]

Are there instructions for the TFE Lite Weight Window installation? I get the gist, but am unsure whether it goes inside or outside the roll cage and how to best fold it. Should I score it to fold?

[robmob]

Originally Posted by LowFlier

Are there instructions for the TFE Lite Weight Window installation? I get the gist, but am unsure whether it goes inside or outside the roll cage and how to best fold it. Should I score it to fold?

Originally Posted by FastEddy

The window is shipped flat and has 2 protective covers, one on each side.

• Remove the 2 screws that hold on the top roof plate.
• Temporarily fit the window in place.
• Locate the fuel filler lid on your tank and make sure the side window with the fuel cut out is on the proper side when the window is folded.
• Remove the window
• There are tiny score marks where the window is to be folded.
• Align the score marks either with a straight edge or on a sharp corner edge of your work bench or table.
• Fold the side windows along the straight edge.
• You will fold them JUST A LITTLE past a 45 angle.
• DO NOT FOLD IT ALL THE WAY FLAT AND CREASE IT. This can possibly cause premature failure.

[LowFlier]

Thank you. The velcro you have in the corners is a good idea too. I'll have to find some of those for mine.