Whose tired of not being able to seat their stock pinion gear properly? or who is concerned a pinion bolt may break?
Vertigo has taken the worry out of this for the HPI Baja with our Hex drive clutch bell unit.. Remove the bolt, remove the problem.
Vertigo Performance Diff Spool doesn’t just replace the spider gears in your diff cup leaving other diff components to fail. Our locker replaces the entire diff assembly in your Losi 5ive ensuring reliability within the differential.
Vertigo Vented Clutch Bells are a one piece Clutch Bell (not welded) welds can break and run untrue.
Our clutch bells are vented correctly so that centrifugal force will extract clutch dust and debris out of the clutch bell and out of harms way of the clutch shoes at the same time as cooling the bell.
Mark from TGN was kind enough to post up these awesome photos of the new Losi 5ive-T release at the Hostile Bajafest in NY. You can check out Mark’s write up “LSN returns from Hostile 2011 and the Losi 5IVE-T official release” on LargeScaleNews.com, and also LSN’s live coverage of the Hostile Bajafest for tons of great pictures and videos.
You can discuss TGN’s exclusive photos of the Losi 5IVE-T in this thread here on RCLS.
Losi Just announced the LOSI 5IVE-T! Bigger. Faster. Stronger. The 1/5-scale Losi® 5IVE-T™ 4WD Off-Road Racing Truck is the closest thing to a full-size vehicle in realism, performance and experience. It features a 4WD drivetrain based on the racing-winning, award winning 8IGHT platfrom, Spektrum™ telemetry receiver, installed sensors, and 1/4-scale servos. And since it’s a Bind-N-Drive™ vehicle, you complete it with the DSM® transmitter of your choice. There’s really nothing like driving an RC truck as big as this. Come take it for a spin in all its 4WD glory.
Kevin at Team Chase has released replacement cage parts so you can buy all of the roll cage pieces individually. The parts are available in four different pieces, top section $106.99, side rails $58.99, internal braces $33.99 and the screw kits $11.99. The cage parts are available at TGN Distributing.
Dpdsurf and I headed north early yesterday for some 1/5 scale racing at Liberty RC’s new 1/5 scale tracks in Petaluma, CA. The guys at Liberty RC Club did a great job getting the track ready for the first race of the 2011 season.
This is an event you do not want to miss! With John Shultz running the event at the premier west coast 1/5 scale track Milestone RC, we should see the top drivers in the nation battling for the top spot on the podium. RCLargeScale.com will be there broadcasting the entire event live for those of you who can’t make it. Continue reading
Turtle Racing has designed & manufactured this Pull Start to greatly reduce the problems starting your Zen/CY motors. We started with a very heavy duty rope, then we added a double sealed bearing to the Spool. The bearing helped tremendously, no more plastic on plastic friction. We then modified the aluminum spawl, polished it and Teflon Plated it. We designed the housing for proper venting while not allowing debris to enter.
I had a great time up at Thunder Valley last weekend attending their “King of California” race. I left late Friday night and stayed at a local hotel so I could get to the track early on Saturday to setup my live broadcasting gear so those who couldn’t make it could watch from home.